Mad Dog Dura-Build (MDPDB) is an Exterior water-based, non-toxic, stabilizing primer that smooths rough and uneven surfaces. Mad Dog Smooth Primer (MDPDB) penetrates and stabilizes to prepare peeling paint, cracking stucco, galvanized metal, wood, and concrete surfaces. MDPDB can often double or triple the job life of many projects.
Mad Dog Dura-Build - A More Uniform Look
- Prevents peeling and creates a smoother top coat finish
- Covers up to 33% more surface than com- petitive high-build primers
- Bridges and seals cracked, weathered and peeling surfaces
- Mold & Mildew resistant
Recommended Surfaces
Rough and uneven surfaces including wood, metals, concrete, stucco, wallboard, plaster, plywood and more
Key Features of Mad Dog Dura-Build (MDPDB)
- 35% solids
- 200% flexibility/200 PSI Adhesion
- 150-200sqft Coverage/Gallon
- Dries in 1 hour. Recoat in 1-2 hours
- Reduces and solves peeling paint, and stucco
- Doubles or triples effective project life of trouble areas
- Can be applied up to 30 mils wet
- Dries light gray
- Tintable - up to 4 oz universal
- 100% Latex
- Soap and water clean-up
- Low odor, Low VOC (<48 g/l)
Application of Mad Dog Dura-Build (MDPDB)
- Remove mold and mildew before painting. Allow appropriate dry time after cleaning
- Air and Surface temp between 50F and 90F (10C to 32C)
- Humidity less than 80%. Substrate moisture content should be approximately 15%
- Do not apply MDPDB if weather conditions will not allow the surface to dry before rain, dew, or freezing
- Cool temperatures or high humidity can retard drying and curing. Allow overnight dry time in these conditions
- Average complete cure time is 7-14 days
- If MDPDB does get wet before it is dry - allow the surface to completely dry then simply touch up/reprime as needed.
- Application Methods
- Shake or stir before using
- Do not thin under normal circumstances
- Apply with brush, roller, or airless sprayer
- Back brush or roll to work MDPDB into cracks or edges
- Airless Sprayer - Use .017 tip in the 1800-2200 PSI range.
