Defy Extreme Wood Stain


$51.95 - $251.95

Defy Stain

DEFY Extreme Wood Stain is a synthetic-resin, semi-transparent wood stain which has quickly become an industry standard in quality. Defy Stain is formulated using state of the art Nano-Technology to create a level of durability and protection that has simply not been available in a wood stain finish in the past. Defy Wood Stain is available in 6 beautiful colors - Cedar, Light Walnut, Natural Pine, Redwood, Driftwood Gray, Butternut.

DEFY Stain Colors

DEFY Extreme Wood Stain Available Colors

Color will vary slightly due to wood species.

DEFY Wood Stain Details

  • Nano Particles and Synthetic Resin blocks UV rays, preventing wood graying
  • Provides protection from mold and mildew
  • Colorizes wood with 6 beautiful colors, and clear
  • Seals wood protecting against water penetration
  • Easy Cleanup(water-based)
  • VOC compliant formula (eco-friendly)

Technical Data for DEFY Extreme Wood Stain

  • Sizes: One Gallon and Five Gallon
  • Coverage Per Gallon: 100-150 sq. feet (100 with 2 coats)
  • Coats Required: 2 Coats. "Wet on Damp"
  • Application Temperature: 45-95 F
  • Application Tools: Pad, Sprayer, Brush, Roller
  • Dry Time: 2-4 Hours
  • Cleanup: Water & Soap
  • State VOC Limits: Compliant in all 50 United States
ProductProduct Code/SKUProduct UPC
Cedar Tone - 1 gallon 300158 709057561013
Cedar Tone - 5 gallon 300159 709057561051
Light Walnut - 1 gallon 300160 709057562010
Light Walnut - 5 gallon 300161 709057562058
Natural Pine - 1 gallon 300162 709057563017
Natural Pine - 5 gallon 300163 709057563055
Redwood - 1 gallon 300419 709057565011
Redwood - 5 gallon 300420 709057565059
Driftwood Gray - 1 gallon 300409 709057564014
Driftwood Gray - 5 gallon 300410 709057564052
Butternut - 1 gallon 300425 709057566018
Butternut - 5 gallon 300426 709057566056


US Paint Supply recommends that as DEFY begins to dirty or dull(should take years when applied properly) you wash the surface with a mild detergent & water. Under intense UV exposure and over enough time, the color will typically fade some. When fading occurrs, test if the surface is ready for a maintenance coat by sprinkling water onto the surface. If the water is immediately/quickly absorbed it is time for a new coat. Start with DEFY Wood Brigthener to clean the surface and lighten any graying that has occured. Allow 24 hours to dry. Once the surface is dry recoat the surface following the directions shown on the can of DEFY Deck Stain. In our experience this maintenance coat may come out somewhat darker than the origin application.

Maintenance Coat for Fading

  1. Test surface by sprinkling water. If quickly absorbed surface needs a recoat.
  2. Use DEFY Wood Brigthener on the surface to clean and lighten any graying.
  3. Allow 24 hours to dry
  4. With the surface prepped, follow the same steps as when you first applied the stain
  5. Keep in mind this coat may come out slightly darker than the original.

Additional Info

  • COVERAGE RATE: Approx. 100-150 sq. ft. per gallon
  • APPLICATION METHOD: Pump sprayer, airless sprayer, pad applicator or brush
  • DRY TIME: 2-4 hours (above 45° F), allow 24 hours before using
  • CLEANUP: Soap and water