C2 Cabinet & Trim Paint

Brand: C2 Paint
The front of a gallon can with C2 Cabinet and Trim Paint in satin sheen
-8%
$90.59
List Price: $98.69
Adding to cart… The item has been added

C2 Cabinet & Trim Paint

Brand: C2 Paint
-8%
$90.59
List Price: $98.69

What it is: Water-based, urethane-reinforced acrylic enamel for cabinets, doors, and trim—smooth leveling, low odor, low VOC.

  • Porcelain-hard durability for high-touch surfaces.
  • Fast workflow: touch-dry ~30 min, recoat 2–4 hrs.
  • Easy application: brush, roll, or spray; water cleanup.
  • Coverage: ~400–450 sq ft/gal (surface dependent).
  • Sheens: Eggshell, Satin, or Semi-Gloss (hardest, most cleanable).
SKU:
B9300-G
Weight:
9.58 LBS

C2 Cabinet & Trim Paint

What it is: A water-based, urethane-reinforced acrylic enamel made specifically for cabinets, doors, trim, and furniture. It levels smoothly, dries fast, and cures to a tough, easy-to-clean finish—with low odor and low VOCs.

Why you’ll like it

  • Porcelain-hard finish: Stands up to daily wear on high-touch surfaces.
  • Low odor, low VOC: Comfortable to use indoors; soap-and-water cleanup.
  • Smooth leveling: Designed to reduce brush/roller marks.
  • PolyWhey® technology: Eco-conscious durability from recycled dairy whey.
  • Sheens: Satin (soft glow) or Semi-Gloss (higher shine).

Where to use

  • Kitchen & bath cabinets
  • Built-ins
  • Doors
  • Trim and wainscotingFurniture
  • Other high use, high touch areas

Coverage & key specs

  • Covers: ~400–450 sq ft per gallon (varies by surface & method).
  • Dry time: Touch ~30 minutes; recoat 2–4 hours; gentle use after 24 hours; full cure ~7 days.
  • Application temp: Only apply when surface/air/product are above 50°F (10°C).
  • Cleanup: Warm, soapy water.

How to apply (step-by-step)

  1. Prep: Clean off grease and wax, scuff-sand glossy areas, vacuum/tack. Repair defects. For bare wood or sand-throughs, prime (e.g., high-quality acrylic primer) and sand smooth. For metal, use a corrosion-resistant primer.
  2. Stir or shake well: Do not thin.
  3. Brush/Roll: Use a quality nylon-poly brush or microfiber/foam mini-roller. Load lightly, maintain a wet edge, and avoid over-working.
  4. Spray (optional): Strain paint. Apply light, even coats.
  5. Coats: Apply 2–3 thin coats for best build and smoothness.
  6. Cure: Protect from heavy use/cleaning for about a week while hardness develops.

Pro tips

  • Work out of direct sun and heavy airflow to reduce lap marks.
  • Edges and profiles look best with multiple thin coats rather than one heavy coat.
  • For maximum hardness on high-traffic areas, many pros add a quart of a compatible hardness additive(e.g. Vermont Natural Coatings Paint Plus) per gallon; test first on a hidden area.

FAQs

Do I need a primer?
Bare wood, repairs, or sand-throughs should be primed and sanded smooth with C2 Sandable Acrylic Primer. Glossy previously painted surfaces should be deglossed/scuff-sanded; spot-prime if needed. Use a corrosion-resistant primer on metal.
Can I spray it?
Yes. Strain the paint Use a 12 to 15-mil size tip. Apply light coats; do not thin unless your equipment specifically requires it.
How long between coats, and when is it fully hard?
Recoat in 2–4 hours under normal conditions. Full service hardness develops in about 7 days; be gentle during the first week.
What’s the VOC and cleanup?
Low VOC; clean tools and spills with warm, soapy water.

Choosing sheen

Not sure which sheen to pick? See our guide to paint finishes.

!